Περιουσιακά στοιχεία Νέο Προσαρμοσμένο έργο

Custom GPS Tracker PCBA Manufacturer for Satellite, 4G and LoRaWAN

805V6

805V6 | Direct Satellite | Optional LoRa/4G/2G | GNSS | OEM/ODM PCBA

The 805V6 Multi-Network Satellite GNSS Tracker PCBA is intended for tracking devices that must operate in remote regions where cellular networks are unavailable or unreliable. The design combines GNSS positioning, direct satellite communication and optional LoRa, 4G and 2G connectivity on one compact PCBA.

Οι αναλυτικές τεχνικές πληροφορίες αυτού του προϊόντος είναι προς το παρόν στα αγγλικά. Επικοινωνήστε μαζί μας για υποστήριξη επιλογής στα ελληνικά.

Direct satellite communication for areas without cellular coverage. No conventional cellular SIM in satellite-only mode. GPS, BDS, GLONASS and Galileo positioning options. Optional satellite, LoRa, 4G and 2G on one platform. Custom schematic and multilayer PCB layout. Low-power architecture for battery and solar trackers. GNSS and satellite antenna integration and RF optimization. Scheduled, motion and emergency reporting modes. Offline storage and automatic retransmission. Optional SOS, geofence, tamper, movement and low-battery alarms. Custom firmware, private protocol and API. Prototype, PCBA assembly, testing and OEM manufacturing.
ΤΙΜΗ ΕΡΓΟΥ
Ζήτηση προσφοράς
Κατά έργοΤιμή και MOQ κατά διαμόρφωση
Χρόνος και διαμόρφωση ανά έργο · Δείγματα · Εξαγωγή USD/EUR

Τιμή και MOQ κατά διαμόρφωση · Απάντηση σε 1 εργάσιμη ημέρα

Προστασία κατά μοντέλο Παγκόσμια παράδοση Τεχνική υποστήριξη
Χρειάζεστε επωνυμία, πρωτόκολλο ή αλλαγές υλικού;Συζήτηση προσαρμογής
SatelliteDirect
Multi-networkLoRa/4G/2G
OEM/ODMPCBA
01 / OVERVIEW

Επισκόπηση

Υλικό πεδίου, τεκμηριωμένη εγκατάσταση και τεχνική υποστήριξη από τη NEXA.

The 805V6 Multi-Network Satellite GNSS Tracker PCBA is intended for tracking devices that must operate in remote regions where cellular networks are unavailable or unreliable. The design combines GNSS positioning, direct satellite communication and optional LoRa, 4G and 2G connectivity on one compact PCBA.

GNSS and satellite communication serve different purposes. The GNSS receiver obtains coordinates from GPS, BDS, GLONASS or Galileo, while the communication module sends coordinates and device data through a communication satellite, LoRa gateway or cellular network.

Satellite-only operation does not require a conventional cellular SIM card, but the selected satellite network may require device activation, a registered terminal identity and a satellite messaging plan. These must be confirmed early in the project.

A hybrid PCBA can select networks by environment: cellular for frequent reporting in populated areas, LoRa for low-power private networks, and satellite as primary or backup outside terrestrial coverage.

Jinshengchang provides schematic design, PCB layout, embedded firmware, communication protocol development, antenna tuning, prototypes, testing and production support. Final dimensions, protection, temperature, power and satellite configuration are confirmed per project.

“Satellite GNSS tracker PCBA for remote assets and areas without cellular coverage, with optional LoRa/4G/2G hybrid communication.”
Οι συνθήκες του χώρου καθορίζουν την προδιαγραφή. Αφήστε τα δεδομένα να απαντήσουν πριν μεγαλώσει το πρόβλημα.
02 / SPECIFICATIONS

Προδιαγραφές

Υλικό πεδίου, τεκμηριωμένη εγκατάσταση και τεχνική υποστήριξη από τη NEXA.

Product type
Custom satellite GNSS tracker PCB or assembled PCBA
Positioning
GPS, BDS, GLONASS and Galileo options
Primary communication
Direct satellite communication
Optional communication
LoRa, LoRaWAN, 4G LTE, LTE Cat 1, LTE-M, NB-IoT or 2G
Cellular SIM
Not required for satellite-only operation
Satellite activation
Compatible satellite account/service plan may be required
Communication direction
One-way or two-way, depending on satellite network
Processor
Low-power MCU or integrated communication processor
PCB structure
Two-layer, four-layer or multilayer by size and RF requirements
Power
Rechargeable battery, primary lithium, vehicle power or solar
Power management
Deep sleep, timed wake-up, motion wake-up and adaptive reporting
Tracking modes
Scheduled, motion-based, real-time and emergency
Sensors
Accelerometer, temperature, light and Hall options
Interfaces
UART, I²C, SPI, ADC, GPIO, USB, RS232, RS485 or CAN
Data storage
Local flash for offline location and event records
Alarms
SOS, geofence, movement, tamper, low battery and communication failure
Antennas
Integrated or external GNSS, satellite, LoRa and cellular
Protocols
MQTT, TCP, UDP, HTTP, HTTPS or custom private protocol
Platform
Web, Android, iOS and API
Firmware update
Local or FOTA where network supports
Customization
PCB dimensions, components, firmware, protocol, interfaces, antennas and enclosure
Dimensions/weight
Confirmed by final PCBA and enclosure
Protection/temperature
Confirmed by complete device design and project
Supply
Prototype, PCBA assembly, testing and volume OEM

CE / FCC / RoHS και πιστοποίηση έργου κατόπιν αιτήματος. Το πλήρες datasheet παρέχεται μετά την εμπορική επιβεβαίωση.

In the box

  • PCBA sample ×1
  • Interface/pinout document ×1
  • Communication and power specification ×1
  • Test record ×1
03 / DEPLOYMENT

Ανάπτυξη

Υλικό πεδίου, τεκμηριωμένη εγκατάσταση και τεχνική υποστήριξη από τη NEXA.

01

Confirm region

Satellite coverage in the operating area.

02

Activate identity

Satellite device identity and service account.

03

Configure networks

LoRa/4G/2G parameters and priority.

04

Register device

Platform device ID and permissions.

05

Set policy

Location intervals, priority and alarms.

06

Install antenna

Sky view and avoid thick metal.

07

External antenna

Preferred inside metal vehicles/enclosures.

08

Site test

Satellite communication at final location.

09

Verify platform

Location and alarm display.

10

Balance power

Reporting interval, cost and runtime.

11

Inspect protection

Enclosure, cables and sealing.

12

Pilot then produce

Approve specification and pilot results.

Τυπικός χρόνος: οι χρόνοι δείγματος και όγκου επιβεβαιώνονται κατά διαμόρφωση και πιστοποίηση.

Book a site survey
04 / APPLICATIONS

Εφαρμογές

Υλικό πεδίου, τεκμηριωμένη εγκατάσταση και τεχνική υποστήριξη από τη NEXA.

Fishing and marine

Boats beyond cellular coverage.

Containers

Cargo crossing remote regions.

Remote vehicles

Desert, mountain, forest and border areas.

Construction equipment

Remote sites and generators.

Outdoor workers

Explorers and emergency response.

Livestock

Large pastures without cellular coverage.

Wildlife

Research and environmental monitoring.

Oil and gas

Pipelines and utility infrastructure.

Solar equipment

Unattended outdoor assets.

Cross-border logistics

International asset tracking.

Maritime SOS

Marine and outdoor safety devices.

OEM tracking products

Satellite/LoRa/cellular customization.

05 / CUSTOMIZATION

Προσαρμογή

Brand customization starts at 500 units, with 30–45 days for engineering validation and first delivery.

Hardware and PCB

Schematic, layout, components, interfaces, antenna and power.

Firmware and protocol

Reporting intervals, event logic, payload encoding and remote configuration.

Satellite configuration

Network, terminal identity, plan and communication direction.

Low-power design

Sleep, wake-up, transmit peaks and battery strategy.

Antenna and RF

GNSS/satellite/cellular/LoRa coexistence and isolation.

Platform and API

Registration, maps, history, alarms and customer interfaces.

Branding and enclosure

Logo, colour, labels, packaging and white-label UI.

Project validation

Prototype, coverage, power, alarms and field pilot.

Κάντε το προϊόν δικό σας brand. Δώστε όγκο και αγορά· η NEXA αναλαμβάνει τα υπόλοιπα.

Start a project
06 / FAQ

Συχνές ερωτήσεις

Υλικό πεδίου, τεκμηριωμένη εγκατάσταση και τεχνική υποστήριξη από τη NEXA.

Can we evaluate samples first$1
Sample availability, quantity and lead time depend on the selected model. Confirm the pilot scope before production.
Can we use our own platform and branding$2
Logo, packaging, firmware, payloads and API integration can be assessed within the OEM/ODM scope.
How are battery life and coverage confirmed$3
Reporting interval, installation, radio conditions and temperature affect results. Confirm the operating profile and validate during the pilot.
Does satellite mode need a SIM card$4
Satellite-only mode does not require a conventional cellular SIM, but a satellite account, terminal identity and messaging plan may be required.
Can LoRa, 4G and satellite be integrated together$5
Same-board integration and automatic switching can be assessed; modules, antennas, power and certification must be confirmed.
What is needed for a quotation$6
Country, quantity, application, network, power/runtime target, platform and interface requirements; drawings or interface documents help.
Can PCB dimensions and interfaces be customized$7
PCB size, layer count, connectors and antenna layout can be assessed around the enclosure, mounting and interface requirements.
What are the protection and temperature ratings$8
A PCBA does not define complete-device protection. Confirm the final enclosure, potting and installation.
Οι τεχνικές λεπτομέρειες και τα άρθρα παρέχονται προς το παρόν στα αγγλικά.