Satellite GNSS tracker PCBA front with communication modules

ASSET / 805V6 1 / 3

الأصول جديد مشروع مخصص

Custom GPS Tracker PCBA Manufacturer for Satellite, 4G and LoRaWAN

805V6

805V6 | Direct Satellite | Optional LoRa/4G/2G | GNSS | OEM/ODM PCBA

The 805V6 Multi-Network Satellite GNSS Tracker PCBA is intended for tracking devices that must operate in remote regions where cellular networks are unavailable or unreliable. The design combines GNSS positioning, direct satellite communication and optional LoRa, 4G and 2G connectivity on one compact PCBA.

التفاصيل التقنية الكاملة لهذا المنتج متاحة حاليًا بالإنجليزية. تواصل معنا للحصول على دعم الاختيار بالعربية.

Direct satellite communication for areas without cellular coverage. No conventional cellular SIM in satellite-only mode. GPS, BDS, GLONASS and Galileo positioning options. Optional satellite, LoRa, 4G and 2G on one platform. Custom schematic and multilayer PCB layout. Low-power architecture for battery and solar trackers. GNSS and satellite antenna integration and RF optimization. Scheduled, motion and emergency reporting modes. Offline storage and automatic retransmission. Optional SOS, geofence, tamper, movement and low-battery alarms. Custom firmware, private protocol and API. Prototype, PCBA assembly, testing and OEM manufacturing.

سعر المشروع

اطلب عرض سعر

حسب المشروعالسعر والحد الأدنى حسب التكوين

المدة والتكوين حسب المشروع · عينات · تصدير USD/EUR

Request quote

السعر والحد الأدنى حسب التكوين · رد خلال يوم عمل

الحماية حسب الطراز تسليم عالمي دعم هندسي

تحتاج علامة أو بروتوكولًا أو تعديلات عتاد؟تحدث عن التخصيص

SatelliteDirect

Multi-networkLoRa/4G/2G

OEM/ODMPCBA

نظرة عامة المواصفات النشر التطبيقات التخصيص الأسئلة الشائعة Request quote

01 / OVERVIEW

نظرة عامة

عتاد ميداني ونشر موثق ودعم هندسي من NEXA.

GNSS and satellite communication serve different purposes. The GNSS receiver obtains coordinates from GPS, BDS, GLONASS or Galileo, while the communication module sends coordinates and device data through a communication satellite, LoRa gateway or cellular network.

Satellite-only operation does not require a conventional cellular SIM card, but the selected satellite network may require device activation, a registered terminal identity and a satellite messaging plan. These must be confirmed early in the project.

A hybrid PCBA can select networks by environment: cellular for frequent reporting in populated areas, LoRa for low-power private networks, and satellite as primary or backup outside terrestrial coverage.

Jinshengchang provides schematic design, PCB layout, embedded firmware, communication protocol development, antenna tuning, prototypes, testing and production support. Final dimensions, protection, temperature, power and satellite configuration are confirmed per project.

“Satellite GNSS tracker PCBA for remote assets and areas without cellular coverage, with optional LoRa/4G/2G hybrid communication.”
ظروف الموقع تحدد المواصفات. دع البيانات تجيب قبل أن تتفاقم المشكلة.

02 / SPECIFICATIONS

المواصفات

عتاد ميداني ونشر موثق ودعم هندسي من NEXA.

Product type: Custom satellite GNSS tracker PCB or assembled PCBA
Positioning: GPS, BDS, GLONASS and Galileo options
Primary communication: Direct satellite communication
Optional communication: LoRa, LoRaWAN, 4G LTE, LTE Cat 1, LTE-M, NB-IoT or 2G
Cellular SIM: Not required for satellite-only operation
Satellite activation: Compatible satellite account/service plan may be required
Communication direction: One-way or two-way, depending on satellite network
Processor: Low-power MCU or integrated communication processor
PCB structure: Two-layer, four-layer or multilayer by size and RF requirements
Power: Rechargeable battery, primary lithium, vehicle power or solar
Power management: Deep sleep, timed wake-up, motion wake-up and adaptive reporting
Tracking modes: Scheduled, motion-based, real-time and emergency
Sensors: Accelerometer, temperature, light and Hall options
Interfaces: UART, I²C, SPI, ADC, GPIO, USB, RS232, RS485 or CAN
Data storage: Local flash for offline location and event records
Alarms: SOS, geofence, movement, tamper, low battery and communication failure
Antennas: Integrated or external GNSS, satellite, LoRa and cellular
Protocols: MQTT, TCP, UDP, HTTP, HTTPS or custom private protocol
Platform: Web, Android, iOS and API
Firmware update: Local or FOTA where network supports
Customization: PCB dimensions, components, firmware, protocol, interfaces, antennas and enclosure
Dimensions/weight: Confirmed by final PCBA and enclosure
Protection/temperature: Confirmed by complete device design and project
Supply: Prototype, PCBA assembly, testing and volume OEM

شهادات CE / FCC / RoHS وشهادات المشروع عند الطلب. تُقدم ورقة البيانات الكاملة بعد التأكيد التجاري.

In the box

PCBA sample ×1
Interface/pinout document ×1
Communication and power specification ×1
Test record ×1

03 / DEPLOYMENT

النشر

عتاد ميداني ونشر موثق ودعم هندسي من NEXA.

Confirm region

Satellite coverage in the operating area.

Activate identity

Satellite device identity and service account.

Configure networks

LoRa/4G/2G parameters and priority.

Register device

Platform device ID and permissions.

Set policy

Location intervals, priority and alarms.

Install antenna

Sky view and avoid thick metal.

External antenna

Preferred inside metal vehicles/enclosures.

Site test

Satellite communication at final location.

Verify platform

Location and alarm display.

Balance power

Reporting interval, cost and runtime.

Inspect protection

Enclosure, cables and sealing.

Pilot then produce

Approve specification and pilot results.

المدة النموذجية: تُؤكد مدد العينات والجملة حسب التكوين ومتطلبات الشهادات.

Book a site survey

04 / APPLICATIONS

التطبيقات

عتاد ميداني ونشر موثق ودعم هندسي من NEXA.

Fishing and marine

Boats beyond cellular coverage.

Containers

Cargo crossing remote regions.

Remote vehicles

Desert, mountain, forest and border areas.

Construction equipment

Remote sites and generators.

Outdoor workers

Explorers and emergency response.

Livestock

Large pastures without cellular coverage.

Wildlife

Research and environmental monitoring.

Oil and gas

Pipelines and utility infrastructure.

Solar equipment

Unattended outdoor assets.

Cross-border logistics

International asset tracking.

Maritime SOS

Marine and outdoor safety devices.

OEM tracking products

Satellite/LoRa/cellular customization.

05 / CUSTOMIZATION

التخصيص

Brand customization starts at 500 units, with 30–45 days for engineering validation and first delivery.

Hardware and PCB

Schematic, layout, components, interfaces, antenna and power.

Firmware and protocol

Reporting intervals, event logic, payload encoding and remote configuration.

Satellite configuration

Network, terminal identity, plan and communication direction.

Low-power design

Sleep, wake-up, transmit peaks and battery strategy.

Antenna and RF

GNSS/satellite/cellular/LoRa coexistence and isolation.

Platform and API

Registration, maps, history, alarms and customer interfaces.

Branding and enclosure

Logo, colour, labels, packaging and white-label UI.

Project validation

Prototype, coverage, power, alarms and field pilot.

حوّل هذا المنتج إلى علامتك الخاصة. أخبرنا بالكمية والسوق المستهدف؛ وتتولى NEXA الباقي.

Start a project

06 / FAQ

الأسئلة الشائعة

عتاد ميداني ونشر موثق ودعم هندسي من NEXA.

Can we evaluate samples first$1

Sample availability, quantity and lead time depend on the selected model. Confirm the pilot scope before production.

Can we use our own platform and branding$2

Logo, packaging, firmware, payloads and API integration can be assessed within the OEM/ODM scope.

How are battery life and coverage confirmed$3

Reporting interval, installation, radio conditions and temperature affect results. Confirm the operating profile and validate during the pilot.

Does satellite mode need a SIM card$4

Satellite-only mode does not require a conventional cellular SIM, but a satellite account, terminal identity and messaging plan may be required.

Can LoRa, 4G and satellite be integrated together$5

Same-board integration and automatic switching can be assessed; modules, antennas, power and certification must be confirmed.

What is needed for a quotation$6

Country, quantity, application, network, power/runtime target, platform and interface requirements; drawings or interface documents help.

Can PCB dimensions and interfaces be customized$7

PCB size, layer count, connectors and antenna layout can be assessed around the enclosure, mounting and interface requirements.

What are the protection and temperature ratings$8

A PCBA does not define complete-device protection. Confirm the final enclosure, potting and installation.

Custom GPS Tracker PCBA Manufacturer for Satellite, 4G and LoRaWAN

نظرة عامة

المواصفات

In the box

النشر

Confirm region

Activate identity

Configure networks

Register device

Set policy

Install antenna

External antenna

Site test

Verify platform

Balance power

Inspect protection

Pilot then produce

التطبيقات

Fishing and marine

Containers

Remote vehicles

Construction equipment

Outdoor workers

Livestock

Wildlife

Oil and gas

Solar equipment

Cross-border logistics

Maritime SOS

OEM tracking products

التخصيص

الأسئلة الشائعة

أحدث منتجات الفئة

Portable GPS Asset Locator

GPS Logistics Lock

GPS Electronic Container Seal

مقالات تقنية ذات صلة

الأصول · دليل الاختيار

الأصول · النشر

الأصول · أنظمة البيانات